How to Rip DVD to iPod Touch, iPod Nano Converter on Windows, Vista and Mac

The software you will need: DVD to iPod Converter Windows(DVD to iPod Vista) and DVD to iPod for Mac.
This guide will show you how to rip DVD to iPod Touch with these iPod Nano Converter.
The following video and audio formats are supported by iPod Touch/iPod Nano: H.264, MPEG-4, MP3, AAC, WAV. So for you enjoy DVD on iPod, you need to convert DVD to these formats.

Part One: How to rip DVD to iPod Windows, DVD to iPod Vista
Part Two: How to rip DVD to iPod Mac

Part One:
1. Download Aiseesoft DVD to iPod Converter Windows(DVD to iPod Vista), then follow the instructions to install and run it.



2. Click "Load DVD" to load DVD, DVD Folder or IFO files.
3. Click "Profile" to set the exact output format. Click "Settings" to set the exact parameters for your iPod. Select "Audio Track" and "Subtitle" for the output file.
4. After finishing all the pre-settings, click "Start".

Part Two:
1. Download Aiseesoft DVD to iPod Mac (Intel, Power PC). Install and run it.



2. All the process are the same as DVD to iPod Windows.

Tips:
1. Click "Effect" to make special effect for your video.
You can adjust Brightness, Contract, Saturation of the video and the adjust the volume of music.
2. "Trim" function is for you to select the clips you want to convert.
3. Cut off the black edges of the original video and watch in full screen on your iPod using the "Crop" function.
4. This software allows you to join several DVD chapters into one clips by using "Merge into one file".

iPAQ converter - convert mpeg mp4 wmv avi to ipaq, rip dvd to ipaq

The tutorial includes two parts. The part 1 will show you how to convert mpeg mp4 wmv flv 3gp avi to iPAQ video step by step with Aiseesoft Total Video Converter. And the part 2 will show you how to convert dvd movie to iPAQ video step by step with Aiseesoft DVD Ripper. The detailed steps are as follows:

Part1. how to convert mpeg mp4 wmv flv 3gp avi to iPAQ video?
Aiseesoft Total Video Converter is a powerful iPAQ video converter which can convert various video formats including AVI, Divx, XviD, WMV, MPEG, MPG, FLV(YouTube video), RM, RMVB, TOD, MOD, ASF, H.264, etc to iPAQ video. And it is a video joiner, and video editor for you to convert video files to the formats you want, so you can enjoy you movie on all common digital players like iPod, Zune, iPhone, Apple TV, PSP, Xbox 360, PS3, Archos, iRiver, Creative Zen, PMP, Smart Phone, Pocket PC, PDA, Mobile Phone, etc.

Here's the tutorial about how to convert mpeg mp4 wmv flv 3gp avi to iPAQ video with Aiseesoft Total Video Converter

Step1 Free to Download Aiseesoft Total Video Converter and install it.

Step2 Click the "Add File" button to import your videos. If you experience any problems adding videos by directly clicking the "Add File" button, you can click "File -> Add File" to add the video files you want to convert from your computer.



Step3 This software can convert video to various video formats for PMP, Xbox 360, iPod, PSP, Zune, cell phone, etc. Click the "Profile" drop-down list to select the format "HP iPAQ Video(*.wmv)"



Step4 If you want to customize the output quality, click the "Settings" button to open the Settings panel, where you can set resolution, frame rate, video bit rate, audio bit rate, sample, etc.



Step5 Click the "Browse" button to specify a location on your computer to save the converted movie. If you want to open the output folder, you can just click the button "Open Folder". If you want to merge the added video files into one file, check the option "Merge into one file". By default, the the merged file is named after the first selected file.

Step6 When you get ready to convert the added video files, click the “Start” button to start conversion.

Part 2. how to convert dvd movie to iPAQ video?
Aiseesoft DVD Ripper is all-in-one, super fast DVD ripper software. The best DVD ripper can rip DVD movies to all popular video and audio formats. And it let you easily copy DVD movie to iPAQ video, iPod Video, Zune, iPhone, Apple TV, PSP, Xbox 360, PS3, Archos, iRiver, Creative Zen, PMP, MP4/MP3 Player, Smart Phone, Pocket PC, PDA, Mobile Phone, etc.

Step1. Download Aiseesoft DVD Ripper and install it.

Step2. Insert your DVD disc into your DVD-Rom, then run the software, click "Load DVD" button and add the DVD file. You can also add DVD/IFO from your hard disk by clicking "Load IFO File".



Step3. This software can convert DVD to various video formats such as MPEG-4, AVI, WMV, FLV, 3GP, VOB, etc. Click the "Profile" drop-down list to select the format "HP iPAQ Video(*.wmv)".



If you want to customize the output video, you can click the "Settings" button next to the format field to open the Settings window and set video resolution, frame rate, bit rate, encoder, etc. See the figure below:



Step4. Select Subtitle and Audio
Regular DVD movies usually have several subtitles such as English, French, German, etc. You can select one you prefer. You can also delete the subtitle by selecting "No Subtitle", Selecting Audio is the same.

Step5. After the above steps, click "Start" to start conversion.

How to convert MTS, TS, M2TS Video to HD video, MP4, WMV, AVI

Record everything around you and share with the world/friends/family is becoming more and more popular among young people. Get a HD Camcorder is necessary and also how to share is really important. I think you can use youtube.com, make a DVD and so on. As the video you record on your camcorder is MTS, TS, M2TS or other HD video format, so you have to convert them into normal video format to edit.

Today I will share with you how to convert MTS, TS, M2TS video to normal video formats.
You need 3 nice tool to do it: MTS Converter, TS Video Converter, M2TS Converter.

Part 1: How to convert MTS video
Step 1: Load Video
Click "Add File" to load the video that you want.

Step 2: Choose Your Output Profile and Settings
From "Profile" drop-down list you can choose your output profile according to your need.
For example, if you have a iPod and you want to convert video for it, you need to choose "iPod" from the profile list and then it also provides the second chance to specify your iPod generation.
You can also click "setting" adjust the settings of your output video, such as "video/audio encoder", "Video/audio Bitrate", "Channels", "Resolution" and so on..

Step 3: Video Editing
This powerful MTS Converter allows you to do many video editings.
1. Click "Effect" to make special effect for your movie.
You can adjust the "Brightness", "Contrast", "Saturation" and also you can use "deinterlacing" to improve you output effect.

2. Trim:
"Trim" function allows you to pick up any part of your video to convert. You can just convert a part of your video that you want.

3: Crop:
Cut off the black edges of the original movie video and watch in full screen on your iPod using the "Crop" function.

Step 4: Conversion
After you have done all the steps above you can click "Start" button to start your conversion.

Part 2: How to convert TS video

Step 1: Load Video
Click "Add File" to load the video that you want to convert.

Step 2: Choose Your Output Profile and Settings
From "Profile" drop-down list you can choose your output profile according to your need.
You can also click "setteing" adjust the settings of your output video, such as "video/audio encoder", "Video/audio Bitrate", "Channels", "Resolution" and so on..

Step 3: Conversion
After you have done all the steps above you can click "Start" button to start your conversion.

Tips: Video Editing
This powerful TS Converter allows you to do many video editings.
1. Click "Effect" to make special effect for your movie.
You can adjust the "Brightness", "Contrast", "Saturation" and also you can use "deinterlacing" to improve you output effect.
2. Trim:
"Trim" function allows you to pick up any part of your video to convert. You can just convert a part of your video that you want.
3: Crop:
Cut off the black edges of the original movie video and watch in full screen on your iPod using the "Crop" function.

Part 3: How to convert M2TS video

Step 1: Add File
Load your M2TS video.

Step 2: Choose Profile and Settings
Select your output profile according your need and adjust the settings of your output video if you like.
(the default setting works well)

Step 3: Start Conversion
Click "Start" to begin your conversion.

Get ’em, Boies: Salesforce Countersues Microsoft

Salesforce.com CEO Marc Benioff says Microsoft is a patent troll. Looks like it takes one to know one. On Thursday, the company answered Microsoft’s charges of patent infringement with patent-infringement charges of its own.

In a suit filed in U.S. District Court in Delaware, Salesforce accuses Microsoft of willfully violating five of its patents and using them in everything from Windows 7 to the Windows Live authentication system. And the company is really going for the neck here: Not only is it seeking triple monetary damages, it has hired David Boies, the former U.S. Justice Department attorney who successfully argued the agency’s antitrust case against Microsoft, to represent it.

But if Microsoft (MSFT) finds this disconcerting, the company isn’t letting on. Reached for comment, Horacio Gutierrez, vice president and deputy general counsel, said it’s still intent on taking Salesforce (CRM) to the mat over this. “We are reviewing Salesforce.com’s filing, which we have just received,” he said. “We remain confident about our position and will continue to press ahead with the complaint we initiated in the U.S. District Court for the Western District of Washington.”

EBay Now Equipped With Frickin’ RedLasers

EBay CEO John Donahoe says that a few years from now we’ll be making more purchases with our cellphones than from our wallets. And the company’s sales do seem to bear that out. At our D8 conference, Donahoe said eBay’s (EBAY) iPhone app was responsible for $600 million in sales last year. So the company’s acquisition today of RedLaser makes good sense.

The mobile barcode-scanning application has proven a big hit with savvy shoppers who use it for on-the-spot comparative pricing information, snapping photos of barcodes, which the application uses to discover additional information about the product as well as prices from other merchants. Now that eBay owns it, a lot of that information will be pulled from its own listings and retail partners.

When it debuted on Apple’s (AAPL) iTunes App Store, RedLaser was priced at $2. But beginning today, eBay is offering it for free, and soon it will integrate RedLaser’s barcode scanning tech into its current iPhone applications.

Terms of the deal were not disclosed.

Underpromise and Early Deliver: Apple Says Some iPhone 4 Pre-Orders Coming Tomorrow

Here’s a nice surprise for early adopters who managed to successfully place an iPhone 4 order on the first day it was possible to do so: Some of you may receive your device a day early. According to an email notification from Apple (AAPL) to some pre-order customers, iPhone 4 delivery “will occur on June 23rd.” That’s tomorrow, not the originally promised delivery date of June 24.

Dear Apple Store Customer,

You recently received a Shipment Notification email from Apple advising you that your iPhone has shipped.

This email is to confirm that your delivery will occur on June 23rd. Although Apple and FedEx tracking information may currently indicate a later date, you can check the FedEx website the morning of the June 23rd to track your package to your doorstep.

In the event that you will not be available to accept delivery on June 23rd, it may be more convenient to use our pre-sign delivery option by visiting our Order Status website at http://www.apple.com/orderstatus.

Sincerely,

The Apple Store Team

The reason for the change in delivery date isn’t clear, though it might be that Apple is hoping to protect its servers from meltdown by staggering initial iPhone activations over two days.

How to sync and put cusomized ringtone on iPhone

There are also some other ways to convert audio to iPhone ringtone and sync it to iPhone with iTunes, but I think these are a little complicated and users may be at a loss with such ways.

Here I recommend iPhone PC Suite, an almighty iPhone manager that can let you manage phone book, software, media and other files between iPhone and computer without iTunes easily.

But before using this tool, make sure your iTunes installed and has been connected with iPhone once before (Then you will never need not run iTunes when you use iPhone PC Suite to manage your iPhone).And when the first time you connecting iPhone, it will install PhoneDaemon on your iPhone, don’t worry it is green software and will do nothing harm.

Now I will show you how to sync the converted iPhone ringtone to iPhone without iTunes. Connect you iPhone to computer, double click” iPhone PC Suite” to start iPhone PC Suite, the program will scan you iPhone automatically for a short while. Then click button “Personal” on the main menu, select ”ringtone”.



Click “New Ringtone” to locate the converted iPhone ringtone.

Select your target iPhone ringtone, then it will upload the ringtone to iPhone automatically.



Then you can select your favorite audio file and set it as your iPhone ringtone on iPhone. Click “setting”->”Sound”->”Ringtone”, the converted ringtone is listed on column “Customize”. Now you can enjoy the fun of your unique iPhone ringtone!
This free iPhone PC Suite also has other powerful functions, we will share them later.

Previous part: How to convert DVD, Movie, Music to iPhone ringtone and put ringtone on iPhone?

How to clone DVD to DVD folder for Mac

The DVD protection technology makes it dead difficult to clone DVD to DVD folder for Mac, since the protection of DVD must be removed, can you finish the task to clone DVD to DVD folder.

Aiseesoft DVD Copy for Mac is very useful, and simple to use to clone DVD Mac, But this software only suit for the Mac type computer. Go ahead and download this DVD Copy for Mac.

Buy NowFree trial(Intel PPC)

To see how the process of clone DVD to DVD folder for Mac, follows the following steps:

Select clone DVD Mode: Choose “Full Disc ” button or “Main Movie Mode” button according to your needs.

Select souce: Select DVD-video disc here to clone your DVD.

Choose target: Choose DVD folder to continue.

Start clone:Click”Start” to begin your DVD Clone Mac.

learn more on: how to edit DVD file with DVD Copy for Mac.

New Zune2 review (part 2-1) upgrade, hardware, software and Social

When we first caught wind that Microsoft was in fact doing its own portable media player (and then published the first ever photo of the Zune), we hoped it might finally be the play to knock the iPod off its perch. Sure, in mid 2006 there was no shortage of devices more advanced than any given iPod, but then (and now) the iPod enjoyed unchecked dominance of the market in the US and many countries abroad. Steve Jobs knew the day would come that Microsoft would really enter the game.
What we were hoping for was that the portable media world might be in store for another Sony / Nintendo upset. Remember in the 90s how Sony and Nintendo's partnership went awry, and Sony, totally sick of Nintendo completely owning the game console space, brought out the original PlayStation? Before the console's second generation was through Sony had more market share than they knew what to do with. Sony upped Nintendo's game with the PlayStation, then upped their own with the PlayStation 2 -- and took over.
If Sony could do the impossible and topple the infallible Nintendo of old, surely Microsoft, the world's largest technology company, could make at least make a dent in Apple's armor. Yeah, the first-gen product is important, but the second gen product is crucial, because if you can't up your game -- and everyone else's -- you're just another player. This year, Microsoft really had to make the Zune count. Read on to judge for yourself whether they did.
The first generation Zune, as we all know, was little more than a slew of off the shelf hardware and software Microsoft cobbled together in a rush to make a play for the annual holiday gold rush. And the interesting part is, all things considered, it really wasn't bad at all. No one thought it was "done", but it was a lot better than some of the other PMC-based devices we'd seen to date. This year Microsoft brought a slew of new Zune products (and enhancements) to the table, including two new players (flagship 80GB and the flash model), new device software (which runs on all devices), new desktop software, and a new service (Zune Social, a music-oriented social network reminiscent of Xbox Live).



Device software
Yeah, we know Microsoft technically skipped right past device software v2.0 and jumped to 2.2, but the update is the best place to start since it affects the most users and devices. Microsoft won some well-deserved brownie points for ensuring all Zune players new and old can run the new firmware, meaning that for now your old Zune will have feature parity with the new hardware.
So here's the deal with the device software: it adds some crucial bits (many of which we expected the first time), takes away some minor but important things, and leaves the other 90% largely unchanged. First, the stuff Zune 2.0 takes away:
Song flagging
The five star rating system
The language menu The good stuff, though, is very good:
MPEG-4 and H.264 playback support
Podcasting support
Sync over WiFi (which we'll get to later)
In terms of performance, both old and new hardware and firmware were almost identical in testing. A lot of people have been claiming the new firmware is much snappier, but we didn't find that to be true at all. Two Zune 30 devices boot up within a half second between 1.0 and 2.0 series firmwares, and the flash-based Zune 8 we tested booted to home screen less than a second faster. Traversing menus took no more or less time or when syncing and the like. (Note: scrolling through long lists appears to happen slightly faster, but that's likelier an interface tweak, not a performance increase.)

Related theme:
New Zune review part 2-1
New Zune review part 2-2
New Zune review part 2-3
New Zune review part 2-4

Recommended Products:
Aiseesoft DVD to Zune Suite
It can help you convert DVD, IFO and all video formats to Zune, Zune 2 MP4, WMV and Zune supported audio MP3, WMA, and AAC etc.

Apple Gives iOS Developers a Little More Language Leeway

Apple has quietly updated the iOS Developer Program License Agreement, relaxing a restriction on interpreted code that has effectively kept Adobe’s Flash platform off the iPhone–but not enough to allow it on.

When Apple (AAPL) last updated the agreement, in April, the following text was added to section 3.3.2.

No interpreted code may be downloaded or used in an Application except for code that is interpreted and run by Apple’s Documented APIs and built-in interpreter(s).

This text banned cross-compilers like Adobe’s (ADBE) Flash-to-iPhone utility, which would have allowed apps written in Flash to run on the iPhone. But the change also seemed to restrict the use of interpreted languages like Lua, which figure prominently in games like Tap Tap Revenge. Now Apple has tweaked the restriction, adjusting it to permit the use of interpreted code, provided it is used only for minor features and with Apple’s written consent. Here’s the updated text:

Unless otherwise approved by Apple in writing, no interpreted code may be downloaded or used in an Application except for code that is interpreted and run by Apple’s Documented APIs and built-in interpreter(s). Notwithstanding the foregoing, with Apple’s prior written consent, an Application may use embedded interpreted code in a limited way if such use is solely for providing minor features or functionality that are consistent with the intended and advertised purpose of the Application.

So, a small change but a significant one. Cross-compilers, Flash and middleware platforms are still forbidden, but–with Apple’s explicit blessing–popular game engines or libraries like Lua and Unity 3D are not.

Verizon to Debut Next-Gen Droid on Eve of iPhone 4 Launch

What an astonishing coincidence.

Motorola and Verizon Wireless have set a date for the debut of their next-generation Droid device: Wednesday, June 23, one day prior to the street date for release of Apple’s iPhone 4. Presiding over the launch: Verizon Wireless marketing chief John Stratton, Google (GOOG) VP of engineering Andy Rubin, Motorola co-CEO Sanjay Jha, and–more interestingly–Adobe (ADBE) CEO Shantanu “Thoughts on Flash” Narayen (see invitation above; click to enlarge).

A bold move. But a potentially foolish one as well. If this year’s iPhone launch week is anything like those of years past, Apple (AAPL) will be sucking so much air out of the news cycle there may be little left for Verizon (VZ) and Motorola (MOT), even if this latest Droid is as promising as it sounds.

FBI Opens Probe of iPad Breach

The Federal Bureau of Investigation has opened an investigation into the security breach in AT&T Inc.’s (T) website that exposed the email addresses of some iPad owners.

“The FBI is aware of these possible computer intrusions and has opened an investigation,” said Katherine Schweit, an FBI spokeswoman. Ms. Schweit said the FBI opened the investigation Thursday but it will not comment on what it is looking at. “It’s very early in the investigation,” she said.

AT&T, the sole U.S. provider of wireless service for the Apple Inc. (AAPL) tablets, acknowledged Wednesday that a security flaw in its website made it possible for iPad users’ email addresses to be exposed.

Read the rest of this post on the original site

Some problems the new iPod touch users may meet

1. How to change iTunes to recognize the new iPod touch
Some New iPod users may meet the situation that your iTunes can not detect your new iPod nano, iPod touch, or iPod Classic. It should recognize it immediately. If it doesn't, download the latest version of iTunes. The problem will be solved:
1) Re-launch iTunes, with and without your iPod plugged in.
2) With iTunes open, reset your iPod Touch
(here:http://docs.info.apple.com/article.html?artnum=305743 ) Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds until the Apple logo appears.
3) Restart your computer leaving your iPod touch plugged in
Note: If you uninstall iTunes from a computer, it will be uninstalled for all the users. But it will show up again for all users once you re-install it again. Before uninstalling each user should backup his/her playlists so they can bring them back when the re-install is completed.No music for any of the users will be removed by iTunes. It will remain intact where it is saved.

2．'I can't turn on my iPod'
I have a 1st or 2nd generation video iPod (80 gig).
My computer is windows 2000 so I downloaded the windows 2000 iTunes. So I decided to update my iPod, it was updated and it was fine. It ran out of power. Then it won't turn on? I tried to charge it but it just keeps saying please wait such and such. I left it there for like 2 hours already, and still it didn't charge up... Is the problem because I updated my iPod or something else? And when I opened my computer, iTunes asked me if I can format my iPod into windows. I put yes, it didnt do anything.So I have to problems, its not charging.. and its not turning on.
by Ashley :'My friend had this same problem a few years ago.She just left it plugged in to her computer for a few days, waited it out... eventually the problem fixed itself on its own. I'd say just wait it out for a day or two, and if it's still having problems, take it in to your nearest Circuit City or something.”
by Karat :'its the most popular iPod problem. If you drain the battery fully, you're screwed. Basically the battery is down, but the darn thing wont charge unless you connect it to the usb and the usb wont detect it unless it has charge! So please take it to your nearest apple outlet.”
by Kylla :'The one thing you never want to do with an iPod is let it run out of power, not good for it at all :P I've done it a few times but try to avoid it. What you want to do is hold the menu button and the play/pause button at the SAME time and just wait for it. It should restart it. Thats how my iPod works, yours could be different so experiment with the buttons. Try holding perhaps the center button and the play/pause button? or center button and the menu button? Try to see which two buttons will restart it, its bound to work. But hold BOTH of them down at the SAME time with one hand..and be patient, wait for about 10-15 seconds or so. :)”

3. Why does my 30G iPod video always die quickly?
Even when I am just listening to music. It shuts off after about 45 min. And that is a problem because I am going on a plane trip soon and I plan to watch a movie on my iPod, but movies eat your batttery. Does this happen to anyone else???? How can I make the battery life last longer. btw, it is only like a year old.
by dipin :'In an iPod the battery life is different.
it doesnt depend on how old it is rather it depends on how many times you have charged and discharged it.
for increasing the battery life you should fully charge the battery every time you are charging it . and secondly you should never let it discharge completely . put it on charging just before it shows the red signal and disconnect it only when it is fully charged.
sorry to say but now u'll have to get the battery replaced from apple reseller if you want to watch complete movie the battery life as said by apple is 500 complete cycles of charging and discharging”
by sugadoll :'The same thing happened to me. The problem is that your computer can't detect a completly dead iPod, but you need the computer to charge it so your screwed. j/k I solved it by pluging it into my ihome dock that plugs into the wall. So if you have a wall iPod dock or a car one you can charge it enough so that the computer can detect it. Problem solved.

Recommended Products For you:
DVD Ripper for Mac
Convert DVD to any video or audio formats on Mac OS X. Aiseesoft DVD Ripper for Mac is a professional Mac DVD ripper software.
Video Converter for Mac
Convert all video formats from one to another on Mac OS X. Aiseesoft Video Converter for Mac is a specially designed Mac video converter.

How to upload videos to YouTube easily and quickly on Mac

Google has released basic software called Vidnik which is the quickest, simplest way to make movies using the built - in camera on your Macintosh and upload those movies to your YouTube account. You must first sign up for a free YouTube membership to upload videos. You can use Vidnik to create a video diary, or just to quickly record a video comment to attach to an existing YouTube video. Vidnik works with the built-in video cameras on recent Macs, with Firewire video cameras, and with many USB video cameras.

Part 1, use Vidnik to Record video segments using your iSight camera and upload them to YouTube.



To use Vidnik, run the app, then click the record button to start recording. Click it again to stop. Trim to just the golden moments you want to keep, as in the screen shot above. Fill in the required title, description, and so on. Click the upload button. That's it.

Part 2, Use Vidnik to upload videos to youtube
You can drag movies made in other programs onto Vidnik's column of movies, and then click the upload button. And to use another program to do a little post-production, use the Gear menu to show Vidnik's movie file in the Finder. Edit the movie in the other program, and then upload it.Vidnik can only support videos such as: 3GP, AVI, DAT, MOV, MP4, M4A, WAV, AAC. It does not support ASF, FLV, MPEG, RM, WMV, MP3, AC3.
You can use the video converter for Mac to convert your videos to the formats that Vidnik can run.
If you want to upload DVD to TouTube, you need to use DVD ripper to rip DVD to video formats supported by YouTube first. If you are Mac user, you can use this DVD ripper for Mac .

How to connect your Mac and Xbox 360

If, like me, you have your Xbox 360 placed near your wifi-enabled computer, but away from your wireless router or modem, then you'll want to take advantage of the Xbox's ability to "borrow" your computer's internet connection. For Windows users, this process is simple; it's just a matter of "bridging" your computer's wifi connection to your PC's internet port which is plugged into your Xbox. For Mac users, the process is not so easy. What follows is a guide for getting your Xbox 360 to accept Mac OS X's internet sharing option.
Before you start configuring, open up Terminal (in Applications -> Utilities) and type "ifconfig en0" (zero, not a capital-o). You're looking for the bit that says "inet xxx.xxx.xxx.xxx". In my case, the number I get here is 192.168.2.1 Second, note down the IP address of your wireless router, which in my case is 192.168.0.1

On your Mac
1. Connect your Mac to your wireless internet connection
2. Connect your Xbox 360 to your Mac via Ethernet
3. In System Preferences -> Sharing, enable Internet Sharing between your Airport and Ethernet connection

On your Xbox 360
1. Start up your Xbox and navigate to the Network settings menu
2. Under IP address, enter the number you got from the "ifconfig en0" command earlier on, but with the final number one place higher. In my case, I take the 192.168.2.1, and input 192.168.2.2 in the IP address box on my Xbox 360.
3. Under subnet, input 255.255.255.0
4. Under router/gateway, enter the number you got earlier from the "ifconfig en0" command. In my case, that's "192.168.2.1"
5. Move onto DNS. Enter the IP address of your wireless router (in my case, "192.168.0.1") in both the primary and secondary IP address fields
6. Leave PPPoE and advanced settings blank (i.e. OFF and Automatic)
7. You should now be able to connect to Xbox Live via your internet sharing Mac

This guide shows the connection of Mac and Xbox 360 is not so difficult. You can try it by yourself.

WWDC 2010: Steve Jobs on the App Store

In response to a question from Walt Mossberg at last week’s D8 conference addressing criticism about the App Store’s rejection rate, CEO Steve Jobs made a point of noting that Apple supports HTML5, a completely open platform, and that the company supports its own App Store, which is a curated platform.

He reiterated that notion in his keynote today:

“Guess what? Ninety-five percent of all apps submitted are approved within seven days.”

“What about the ones we don’t approve? Well why is that? What are the reasons?

1: The app doesn’t do what you said it would.

2: It uses private APIs…and if they change the app will break.

And the third reason? They crash.”

“If you were in our shoes, you’d be rejecting for the same reasons. Even with this, 95 percent are approved in seven days. Sometimes you read these articles and you think something is going on….”

Students, Parents Allowed to View Webcam Scandal Photos

Suburban Philadelphia parents and their high school-age children soon will learn the extent of a potentially criminal webcam scandal.

A federal magistrate on Friday ordered the Lower Merion School District to start sending notification letters to any student covertly spied on through their school-issued Macbook, as well as to their parents.

Read the rest of this post on the original site

Facebook and “Radical Transparency”

At SXSW, I decided to talk about privacy because I thought that it would be the most important issue of the year. I was more accurate than my wildest dreams. For the last month, I’ve watched as conversations about privacy went from being the topic of the tech elite to a conversation that’s pervasive.

Read the rest of this post on the original site

How to Convert MKV Files

Next is the detailed guide to teach you how to convert MKV files with Aiseesoft MKV Converter.

Step 1 Free download Aiseesoft MKV Converter, install and run the software.

Step 2 Click Add File button to import your MKV files.

Step 3 Click Effect, Trim, Crop to edit output video file.

Tips: Effect is used to adjust video Brightness, Contrast, Saturation; Trim can edit the start and end time of the output video; Crop function can adjust video aspect ratio.

Step 4 Choose your ideal output format from Profile list and click Browse… button to set destination folder to save the converted MKV file.

Step 5 After setting all parameters, press Start button to start MKV to video conversion.

In addition, this professional MKV to Video Converter provides powerful editing functions (Merge, Snapshot, Preview etc.) for you to make use of. Know more functions at: Convert MKV files.

How to Convert AVCHD Video to WMV

Free download Aiseesoft AVCHD Video Converter, install and run it.

Step 1: Add the AVCHD file

As you see in image below, click the Add File button to browse your computer and add the AVCHD video you need to convert.

Step 2: Set output format as WMV

In the Profile drop-down list, choose "WMV - Windows Media Video (*.wmv)" format as output format. If you'd like to convert AVCHD to HD WMV, you can choose "HD WMV Video (*.wmv)".

Furthermore, if you want you can change the destination folder for output file: click Browse… button and choose the folder. And also you can set the video parameters including Encoder, Resolution, Frame Rate, Video Bitrate in Settings panel to customize output videos.

Step 3: Start the conversion

Press the Start button to start the AVCHD to WMV conversion. A few minutes later, your needed WMV file will be generated. You are supposed to click Open Folder to find it.

If you are interested in this AVCHD to WMV Converter, please visit: Convert AVCHD video to WMV.

How to Convert DVD to iRiver

Next is the concrete instruction about how to convert DVD to iRiver with Aiseesoft DVD to iRiver Converter.

Firstly, you need to download Aiseesoft DVD to iRiver Converter. Then install it to your computer and launch the software.

Step 1: Load your DVD disc

Insert the DVD disk into the DVD-ROM and click the Load DVD button to load it. And the DVD content will list in the software window.

Step 2: Select the output format and set parameters

Selecting output format is really easy: Open the Profile drop-down list and scroll to select the format for your iRiver.

In addition, you could change the DVD Audio Track, Subtitle for output format. And to further customize the videos by setting output video size, video quality and video length in Video Edit window.

Step 3: Start DVD to iRiver converting

After setting your own output and settings you can click Start button to start your conversion.

As a customer-oriented conversion software, Aiseesoft DVD to iRiver Converter is definitely easy to operate. A few clicks are all you need to do to convert DVD to iRiver. There are also many additional functions for you. More informations, please visit: Convert DVD to iRiver.